Struct rstubs::arch::int::lapic::InterruptCmdL

#[repr(transparent)]
struct InterruptCmdL(u32);

Interrupt Command Register 1, R/W

Tuple Fields

0: u32

Implementations

impl InterruptCmdL

const fn new() -> Self

Creates a new default initialized bitfield.

const fn from_bits(bits: u32) -> Self

Convert from bits.

const fn into_bits(self) -> u32

Convert into bits.

const VECTOR_BITS: usize = 8usize

const VECTOR_OFFSET: usize = 0usize

pub const fn vector(&self) -> u8

Interrupt vector in the IDT will be activated when the corresponding external interrupt triggers.

Bits: 0..8

pub const fn with_vector(self, value: u8) -> Self

Interrupt vector in the IDT will be activated when the corresponding external interrupt triggers.

Bits: 0..8

pub fn set_vector(&mut self, value: u8)

Interrupt vector in the IDT will be activated when the corresponding external interrupt triggers.

Bits: 0..8

const DELIVERY_MODE_BITS: usize = 3usize

const DELIVERY_MODE_OFFSET: usize = 8usize

pub const fn delivery_mode(&self) -> DeliveryMode

The delivery mode denotes the way the interrupts will be delivered to the local CPU cores, respectively to their local APICs.

Bits: 8..11

pub const fn with_delivery_mode(self, value: DeliveryMode) -> Self

The delivery mode denotes the way the interrupts will be delivered to the local CPU cores, respectively to their local APICs.

Bits: 8..11

pub fn set_delivery_mode(&mut self, value: DeliveryMode)

The delivery mode denotes the way the interrupts will be delivered to the local CPU cores, respectively to their local APICs.

Bits: 8..11

const DESTINATION_MODE_BITS: usize = 1usize

const DESTINATION_MODE_OFFSET: usize = 11usize

pub const fn destination_mode(&self) -> bool

The destination mode.

Clear for a physical destination, or set for a logical destination.

Bits: 11..12

pub const fn with_destination_mode(self, value: bool) -> Self

The destination mode.

Clear for a physical destination, or set for a logical destination.

Bits: 11..12

pub fn set_destination_mode(&mut self, value: bool)

The destination mode.

Clear for a physical destination, or set for a logical destination.

Bits: 11..12

const DELIVERY_STATUS_BITS: usize = 1usize

const DELIVERY_STATUS_OFFSET: usize = 12usize

pub const fn delivery_status(&self) -> bool

Delivery status.

Cleared when the interrupt has been accepted by the target. You should usually wait until this bit clears after sending an interrupt.

Bits: 12..13

pub const fn with_delivery_status(self, value: bool) -> Self

Delivery status.

Cleared when the interrupt has been accepted by the target. You should usually wait until this bit clears after sending an interrupt.

Bits: 12..13

pub fn set_delivery_status(&mut self, value: bool)

Delivery status.

Cleared when the interrupt has been accepted by the target. You should usually wait until this bit clears after sending an interrupt.

Bits: 12..13

const LEVEL_BITS: usize = 1usize

const LEVEL_OFFSET: usize = 14usize

pub const fn level(&self) -> bool

The polarity denotes when an interrupt should be issued.

Clear for INIT level de-assert, otherwise set.

Bits: 14..15

pub const fn with_level(self, value: bool) -> Self

The polarity denotes when an interrupt should be issued.

Clear for INIT level de-assert, otherwise set.

Bits: 14..15

pub fn set_level(&mut self, value: bool)

The polarity denotes when an interrupt should be issued.

Clear for INIT level de-assert, otherwise set.

Bits: 14..15

const TRIGGER_MODE_BITS: usize = 1usize

const TRIGGER_MODE_OFFSET: usize = 15usize

pub const fn trigger_mode(&self) -> bool

The trigger mode states whether the interrupt signaling is level or edge triggered.

Set for INIT level de-assert, otherwise clear.

Bits: 15..16

pub const fn with_trigger_mode(self, value: bool) -> Self

The trigger mode states whether the interrupt signaling is level or edge triggered.

Set for INIT level de-assert, otherwise clear.

Bits: 15..16

pub fn set_trigger_mode(&mut self, value: bool)

The trigger mode states whether the interrupt signaling is level or edge triggered.

Set for INIT level de-assert, otherwise clear.

Bits: 15..16

const DESTINATION_TYPE_BITS: usize = 2usize

const DESTINATION_TYPE_OFFSET: usize = 18usize

pub const fn destination_type(&self) -> u8

Destination type.

If this is > 0 then the destination field is ignored. 1 will always send the interrupt to itself, 2 will send it to all processors, and 3 will send it to all processors aside from the current one.

It is best to avoid using modes 1, 2 and 3, and stick with 0.

Bits: 18..20

pub const fn with_destination_type(self, value: u8) -> Self

Destination type.

If this is > 0 then the destination field is ignored. 1 will always send the interrupt to itself, 2 will send it to all processors, and 3 will send it to all processors aside from the current one.

It is best to avoid using modes 1, 2 and 3, and stick with 0.

Bits: 18..20

pub fn set_destination_type(&mut self, value: u8)

Destination type.

If this is > 0 then the destination field is ignored. 1 will always send the interrupt to itself, 2 will send it to all processors, and 3 will send it to all processors aside from the current one.

It is best to avoid using modes 1, 2 and 3, and stick with 0.

Bits: 18..20

Trait Implementations

impl Clone for InterruptCmdL

fn clone(&self) -> InterruptCmdL

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for InterruptCmdL

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for InterruptCmdL

fn default() -> Self

Returns the “default value” for a type.

impl From<InterruptCmdL> for u32

fn from(v: InterruptCmdL) -> u32

Converts to this type from the input type.

impl From<u32> for InterruptCmdL

fn from(v: u32) -> Self

Converts to this type from the input type.

impl IOMem for InterruptCmdL

const OFFSET: usize = 768usize

impl Copy for InterruptCmdL